The OverBilt SportLoader provides a simple and effective method of hauling a motorcycle while also providing the ability to tow a trailer, camper, or travel trailer. The motorcycle will ride approximately one inch off the bed of the pickup, providing a stable base for the ride.

To load, attach the channel extensions to the rear of the loader and secure with the pin. Run the cradle to the base of the SportLoader and roll the front tire of the motorcycle into the cradle, tighten the bracket against the tire and strap the motorcycle to the cradle for further stability while loading. The rear tire of the motorcycle will track in the channel as the motorcycle is pulled into the bed of the pickup.

As the motorcycle is pulled up the channel, the unit pivots on a tube attached between the tailgate mounting posts, lowering the motorcycle to the bed of the pickup. When the motorcycle’s tire reaches the front of the pickup box,the motorcycle is fully loaded and ready to be strapped in for travel.The channel extensions are secured in the bed of the pickup when not in use.

One person loading and unloading   Optional support stand for working on your bike-SC9012
Stable base for cycle (approximately 1” off the bed)   Additional Cargo Buckle (SC9011)
Removable ramp extensions store in pickup bed   Pivot Tube Required (See Application Guide)
Extension available for over-height pickups (SC9010)   No modifications to the pickup box or wiring required.
     

   
 

SC3000 Overbilt Sport Loader 8 ft.
$2995.00
(280 lbs.)

 

SC3001 Overbilt Sport Loader 6 ft.
$2895.00
(260 lbs.)

 

SportLoader Pivot Tube (Click Here To Select)
Not Included. Must Be Purchased Separately
$145.00