Number

Note

1 -

Bumper fascia must be removed and replaced during installation.

2 -

Requires some trimming of bumper (fascia, plastic, and/or grill).

3 -

Requires Some Drilling (Not Major).

4 -

Requires some trimming of the air dam.

5 -

Requires some trimming of the belly pan.

6 -

Headlights must be removed and replaced during installation.

7 -

Steel belly pan must be removed and remain off the vehicle after installation.

8 -

Fog lights must be removed and remain off the vehicle after installation.

9 -

Tow hooks must be removed and remain off the vehicle after installation.

10 -

The vehicle must have factory tow hooks to mount bracket to.

11 -

The weight of this vehicle is near the 5000 lb class III rating limitations. Some models, depending on options, may exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. For 2001 the Aventa II is now rated at 10,000 lbs and should be used for these applications.

12 -

Non-24" spaced attachment tabs. Requires the use of an adapter to utilize a car mounted tow bar. See the Adapters section of the Accessories. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs

13 -

Use only with motorhome mounted towbars. Removable tabs with only one hole will not attach to car mount towbars or adapters. Does not apply to the Blue Ox Acclaim.

14 -

Due to a tail light bulb out indicator in wiring system, Jeep Grand Cherokee's must be wired with a BX8869 wiring kit. The BX8811 wiring kit can not be used.

15 -

Specific dinghy towing restrictions apply. These may include specific towing speeds and distances. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle manufacturer for specific towing procedures.